Neozen Store
TDS Meter Water Quality Tester – Digital TDS & EC Meter for Accurate Water Purity Testing
TDS Meter Water Quality Tester – Digital TDS & EC Meter for Accurate Water Purity Testing
Couldn't load pickup availability
To avoide your Order Cancellation, Please Provide: Full Address: (House no, Sector, Street, Block, Road name and Nearest Place etc)
Specification
Product name: 2 in 1 TDS meter
Item number: TDS-3
Measure Item: TDS, Temperature
Button: On/Off; Hold; Temp
TDS range: 0~9990ppm
Resolution: 1mg/L(PPM)
Accuracy: ±2%
Temperature range: 0-99℃; 32-210℉
Temperature range: 0℃~50℃; 32℉~122℉
Temp. compensation: 0℃~50℃; 32℉~122℉
Screen: LCD, without backlight
Battery: 3v (1.5v*2), LR44
Auto shut-off: 3 minutes
Dimension: 35*20*160 (mm)
Weight: 43g
Color: Same as photo
Warranty: 15 days replace
Options: Backlight
How to use this meter?
Step 1. remove the cap and turn on the meter.
Step 2: put it into the water. (note: you couldn't put the immersion line under the water). Then gently stir the water to remove bubbles.
Step 3: Wait a few seconds for the value to Stabilize. and then press the hold button.
Step 4: take the TDS meter out of the water, then you can read the value.
Step 5. Press the off button after use. But If you forget to press the off button, this meter will automatically turn off after 3 minutes. This design greatly extends the life of the battery.
step 6: Rinse the meter with pure water after use, and finally put on the cap.
